Hy-Land Project Q2s climbing frame with swing module
Buy Now £3,187.99–£4,609.31
User age: 3-12
Content: 1x Q-Start, 1x Q-Box, 1xQ-Rock, 1x Q-Net, 1x Q-Roof, 1x Swing Module
Dimension: 8,9 x 3,1 x 4 m
Playground area: 10,9 x 7,8 m
Platform height: 1,5 m
Slide length: 3 m
Critical fall height: 1,5 m
Assembly time by 2 pers.: 10
Type of surface
All play equipment must be installed over an impact attenuating surface according to the standard EN 1176-1: 2008, properly prepared for use in children’s playgrounds. The following is a list of commonly used impact attenuation material: double shredded bark mulch, uniform wood chips, fine gravel, fine sand, rubber tiles, poured in place impact attenuating surfacing. For placement on grass, check local regulations.
Paved construction site:
For fixation to a paved surface (e.g. with rubber tiles) anchors are standard included. Only additional anchoring hardware required: e.g. chemical anchors, expanding plugs/bolts.
Non-paved construction site:
For anchoring with concrete in a non-paved surface (e.g. grass, sand) anchors are not standard included. Required:
Anchors Set Uni: 3 sets
Concrete: 440 litre (≈880 kg)
All Hy-land Projects are type-approved and certified by an independent test organization, TüV Rheinland. When Hy-land Projects are built according to the instructions, then each Project complies with EN 1176 : 2008. This is the European standard for playground equipment for public / commercial use. For example for restaurants, hotels, stores, day care centres, sport clubs, camp sites and controlled community areas.
Inspection and maintenance
Hy-land projects do not need additional inspections from a test organization, not after assembly and not throughout the year. All Hy-land projects come with a checklist and logbook. You can legitimately carry out the inspections yourself, that are mandatory for public / commercial playgrounds.
Robust dimensions of pressure-treated pine – stainless steel ladder rungs – powder coated steel handgrips, roof brackets and swing brackets – triple-coated non-corrosive screws and bolts – reinforced PVC sandbox covers – polyamide bolt covers – galvanized steel swing chains – stainless steel swing hooks with nylon bearing – shock absorbing light weight EPDM polymer swing seats. All materials apply to the strictest European health and safety requirements, are weatherproof and UV-resistant.