4 Climbing Rocks, 2 Large Metallic Handgrips, 2 Medium Metallic Handgrips, 53 Bolt Protection Caps, 6 Multi Brackets, 3 Platform Clamping Plates, 2 Slide Anchor Piles, 2 Slide Brackets, 2 Solid Floor Brackets Slide, 1 Hy-Slide, Kit: 1xA 0xB 1xC, Toolset Kit A & C, 3D Leveller, Manuals 1-4, Logo ID Plate, 3 Building Tools
Dimension: 3,9 x 1,6 x 2,3 m
Playground area: 7,4 x 4,6 m
Area: 35 m²
Platform height: 1,5 m
Weight: 206 kg
Slide length: 3 m
Critical fall height: 1,5 m
Timber: 0,35 m³
Assembly time by 2 pers.: 4
Type of surface All play equipment must be installed over an impact attenuating surface according to the standard EN 1176-1: 2008, properly prepared for use in children’s playgrounds. The following is a list of commonly used impact attenuation material: double shredded bark mulch, uniform wood chips, fine gravel, fine sand, rubber tiles, poured in place impact attenuating surfacing. For placement on grass, check local regulations.
Paved construction site:
For fixation to a paved surface (e.g. with rubber tiles) additional hardware required: e.g. chemical anchors, expanding plugs/bolts.
Non-paved construction site:
For anchoring in a non-paved surface (e.g. grass, sand) additionally required:
Anchors Set Uni: 2 sets
Concrete: 90 litre (≈180 kg)
Certification All Hy-land Projects are type-approved and certified by an independent test organization, TüV Rheinland. When Hy-land Projects are built according to the instructions, then each Project complies with EN 1176 : 2008. This is the European standard for playground equipment for public / commercial use. For example for restaurants, hotels, stores, day care centres, sport clubs, camp sites and controlled community areas.
Inspection and maintenance Hy-land projects do not need additional inspections from a test organization, not after assembly and not throughout the year. All Hy-land projects come with a checklist and logbook. You can legitimately carry out the inspections yourself, that are mandatory for public / commercial playgrounds.
Material information Robust dimensions of pressure-treated pine – stainless steel ladder rungs – powder coated steel handgrips, roof brackets and swing brackets – triple-coated non-corrosive screws and bolts – reinforced PVC sandbox covers – polyamide bolt covers – galvanized steel swing chains – stainless steel swing hooks with nylon bearing – shock absorbing light weight EPDM polymer swing seats. All materials apply to the strictest European health and safety requirements, are weatherproof and UV-resistant.